Overview

Here are the parts that are required to biuld trinteract. You can also prototype it first before fabricating a pcb following the wiring diagram below.

Parts

• Trinteract pcb

• Infenion TLV493DA Low Power 3D Magnetic Sensor

• ‘2 x 2.2k Ω SMD Resistor 0805 - R1 & R3

• ‘680 Ω SMD Resistor 0805 - R2

• ‘4.7k Ω SMD Resistor 0805 - R4

• ‘100n SMD Capacitor 0805 - C1

• ‘Tactile Switch 5 X 5mm, 2 mm Actuator Height

• 4x4mm neodymium cube magnet

‘: These parts can be bought from any major electronics supplier, like Digikey or Mouser